Residential garage door service in Newmarket
Mor Garage Doors provides residential garage door repair in Newmarket, Ontario. We diagnose and repair doors that will not open, will not close, get stuck halfway, move unevenly, make unusual noises, or no longer operate safely.
Verified Mor Garage Doors Google reviews
Read reviews from the Mor Garage Doors Google Business Profile to learn about previous service experiences, communication, and completed garage door work.
View every review on Google
Garage door repair services at a glance
A garage door is a connected mechanical system. Springs, cables, cable drums, tracks, rollers, hinges, panels, safety sensors, and the opener must work together for the door to move smoothly. We identify the source of the problem, explain the recommended repair, and provide a clear quote before approved work begins.
Selected system
Start with the connected system, not a guessed part. We inspect the door and automatic controls before recommending work.
We inspect the garage door, spring system, cables, drums, tracks, rollers, hinges, brackets, panels, weather seals, opener connection, and safety controls before recommending a repair.
Selected system
These components work together to lift the door, keep it balanced, and guide it through the opening.
We inspect broken or weakened springs, snapped or frayed cables, cable drums, bottom brackets, door balance, and the connected lifting system.
Bent tracks, worn rollers, loose brackets, and damaged hinges can cause scraping, shaking, noisy movement, or an off-track garage door.
We inspect spring tension, cable movement, track alignment, roller travel, and hardware condition when a door feels heavy, rises unexpectedly, or will not stay open.
Selected system
We test the opener, controls, drive system, and photo eyes as one operating chain.
We troubleshoot opener motors, gears, chains, trolleys, remotes, keypads, wall controls, smart controls, and the connection between the opener and door.
Dirty photo eyes, poor alignment, damaged wiring, or an obstruction can cause a garage door to reverse or refuse to close.
Selected system
The condition of the door itself affects movement, insulation, security, and how well the system closes.
Damaged panels, loose fasteners, worn brackets, and deteriorated weather seals can affect appearance, movement, insulation, and security.
A clear repair recommendation
Newmarket homeowners call Mor Garage Doors when they need a clear explanation of what is wrong with their garage door and what is required to correct it.
From the first symptom to the final test
Mor Garage Doors follows a clear process so Newmarket homeowners understand what is happening at each stage.
Describe whether the door is stuck, noisy, uneven, reversing, moving slowly, or not responding to the opener.
We inspect the springs, cables, cable drums, tracks, rollers, hinges, brackets, panels, hardware, weather seals, and fasteners.
When the problem involves automatic operation, we inspect the opener, drive system, controls, safety sensors, photo eyes, and travel settings.
We identify the damaged, worn, or misaligned components and explain the proposed repair before approved work begins.
The work may include spring replacement, cable repair, track realignment, roller replacement, hinge repair, sensor alignment, opener repair, or hardware adjustment.
We test movement, alignment, balance, opener response, remote operation, sensor response, and safe reversal where applicable.
Recognize the warning signs
Garage door problems often begin with a change in movement, sound, balance, or opener response. Stop using the door if it appears unstable, has a broken spring or cable, or has come off its track.
Tell us what the door is doingStart here when the door feels heavy, stops during travel, or cannot hold its position.
A broken spring, damaged cable, disconnected trolley, opener failure, or another lifting-system problem may prevent the door from opening. Stop operating it if the opener strains, the door rises only a few inches, or the door feels unusually heavy.
A door may stop halfway because of an opener problem, track obstruction, damaged roller, cable issue, or an unbalanced spring system. Continued operation can place more stress on the opener and moving hardware.
Weak or damaged springs can prevent the system from supporting the door weight. A door that falls or will not remain open may create a serious safety risk.
These symptoms can involve the safety sensors, track resistance, alignment, seals, or opener settings.
Blocked, dirty, misaligned, or damaged safety sensors can interrupt the closing cycle. Track resistance, damaged rollers, wiring problems, or opener settings may also cause reversal.
An uneven floor, worn bottom seal, damaged panel, cable imbalance, or incorrect door alignment can leave a visible gap under the door.
Visible instability, shaking, scraping, or unusual noise can point to connected track, roller, hinge, cable, or spring problems.
A loose cable, bent track, worn roller, broken hinge, or spring imbalance can pull the door out of alignment. An off-track door can become unstable and should not be forced open or closed.
Grinding, scraping, squealing, popping, or rattling may point to worn rollers, dry hinges, loose hardware, damaged bearings, track misalignment, or spring and cable problems.
Use this group when the automatic controls respond incorrectly or the opener runs without moving the door.
Stripped gears, a broken chain, a disconnected trolley, a failed drive component, or a broken garage door spring can prevent the opener from moving the door.
Remote and keypad problems may involve batteries, programming, signal interference, damaged controls, opener settings, or the receiving unit.
The practical next step
Repair may be the practical route when:
Replacement may be more practical when:
Still unsure? Call (647) 500-5100 and describe what the door is doing.
Compatible parts and equipment
Repair parts must match the specifications of the existing door and opener system. We check the door or opener model and recommend compatible parts before a repair.
Residential repair coverage
Mor Garage Doors provides garage door repairs in Newmarket for problems involving the door, lifting system, track system, opener, controls, and safety equipment.
Service at your property
Mor Garage Doors provides on-site garage door repair throughout Newmarket. We also travel to the other communities listed in our GTA service areas.
Mor Garage Doors is a service-area business. We come to your home to inspect and repair the garage door. The business address is not a customer walk-in location.
Contact Mor with the property location and the garage door problem to confirm scheduling for your address.
Clear answers before you book
Have another question? Call (647) 500-5100.
Garage door repair may include inspection, diagnosis, adjustment, lubrication, or replacement of components affecting movement and safety. These components can include springs, cables, cable drums, rollers, tracks, hinges, brackets, panels, openers, remotes, keypads, weather seals, and safety sensors.
Arrange an inspection when the door will not open or close, becomes stuck, moves unevenly, shakes, makes loud noises, reverses unexpectedly, or stops responding to the opener. Stop using the door if you see a broken spring, loose cable, bent track, damaged hinge, or off-track roller.
A garage door may reverse because the photo eyes are dirty, blocked, or misaligned. Damaged sensor wiring, resistance in the tracks, worn rollers, an obstruction near the opening, or an opener setting may also interrupt the closing cycle.
A heavy garage door often indicates a broken, weakened, or incorrectly adjusted spring system. Cable problems, track resistance, damaged rollers, or poor balance can also make the door difficult to move. Do not continue lifting a door that feels unusually heavy.
Garage door balancing checks whether the spring system correctly supports the weight of the door. When safe to test manually, a balanced door should move evenly and remain near its position. An unbalanced door may fall, rise, feel heavy, or place excessive strain on the opener.
No. Garage door springs store significant tension and can cause serious injury or property damage if handled incorrectly. Spring replacement requires the correct parts, tools, adjustment methods, and safety procedures.
Yes. Mor Garage Doors inspects opener motors, gears, chains, trolleys, drive components, remotes, keypads, wall controls, smart controls, safety sensors, photo eyes, and the connection between the opener and garage door.
The answer depends on the location and extent of the damage. Some panel and hardware problems can be repaired, while severe structural damage may require panel or door replacement. An inspection is needed to determine whether the door can continue operating safely.
The cost depends on the cause of the problem, the affected components, the door configuration, and the parts required. Mor Garage Doors inspects the system and provides a repair quote based on the diagnosed issue before approved work begins.
Answer a few questions about the symptoms, door, and property. We will use those details to route your request to the right garage door service.